SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart User Manual

S PANNING T REE C OMMANDS
3-121
spanning-tree transmission-limit
Use this command to configure the minimum interval between the
transmission of consecutive RSTP BPDUs. Use the no form to
restore the default.
Syntax
spanning-tree transmission-limit count
no spanning-tree transmission-limit
count - The transmission limit in seconds. (Range: 1-10)
Default Setting
3
Command Mode
Global Configuration
Command Usage
This command limit the maximum transmission rate for BPDUs.
Example
Console(config)#spanning-tree transmission-limit 4
Console(config)#
b_mgmt.book Page 121 Tuesday, July 8, 2003 5:24 PM

SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Specifications

General

Brand	SMC Networks
Model	SMC EZ Switch 10/100/1000 SMCGS8P-Smart
Category	Switch
Language	English