C
OMMAND
L
INE
I
NTERFACE
3-14
General Commands
enable
Use this command to activate Privileged Exec mode. In privileged
mode, additional commands are available, and certain commands
display additional information. See “Understanding Command
Modes” on page 3-7.
Syntax
enable [level]
level - Privilege level to log into the device.
The device has two predefined privilege levels:
0: Normal Exec, 15: Privileged Exec. Enter level 15 to access
Privileged Exec mode.
Default Setting
Level 15
Command Function Mode Page
enable Activates privileged mode NE 3-14
disable Returns to normal mode from privileged
mode
PE 3-15
configure Activates global configuration mode PE 3-16
reload Restarts the system PE 3-18
end Returns to Privileged Exec mode GC, IC,
LC, VC
3-18
exit Returns to the previous configuration
mode, or exits the CLI
any 3-19
quit Exits a CLI session NE, PE 3-19
help Shows how to use help any NA
? Shows options for command completion
(context sensitive)
any NA
b_mgmt.book Page 14 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
Need help?
General
