SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart User Manual

C OMMAND L INE I NTERFACE
3-60
radius-server retransmit
Use this command to set the number of retries. Use the no form to
restore the default.
Syntax
radius-server retransmit number_of_retries
no radius-server retransmit
number_of_retries - Number of times the switch will try to
authenticate logon access via the RADIUS server. (Range: 1 -
30)
Default Setting
2
Command Mode
Global Configuration
Example
radius-server timeout
Use this command to set the interval between transmitting
authentication requests to the RADIUS server. Use the no form to
restore the default.
Syntax
radius-server timeout number_of_seconds
no radius-server timeout
number_of_seconds - Number of seconds the switch waits
for a reply before resending a request. (Range: 1-65535)
Default Setting
5
Console(config)#radius-server retransmit 5
Console(config)#
b_mgmt.book Page 60 Tuesday, July 8, 2003 5:24 PM

SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Specifications

General

Brand	SMC Networks
Model	SMC EZ Switch 10/100/1000 SMCGS8P-Smart
Category	Switch
Language	English