S
YSTEM
M
ANAGEMENT
C
OMMANDS
3-53
Command Usage
• For a description of the items shown by this command, refer to
“Displaying System Information” on page 2-8
• The POST results should all display “PASS.” If any POST test
indicates “FAIL,” contact your distributor for assistance.
Example
show users
Shows all active console and Telnet sessions, including user name,
idle time, and IP address of Telnet client.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Console#show system
System description: SMC8612T
System OID string: 1.3.6.1.4.1.202.20.25
System information
System Up time: 0 days, 1 hours, 23 minutes, and 44.61 seconds
System Name : SMC8612T switch
System Location : Boston
System Contact : Charles
MAC address : 00-30-f1-47-58-3a
Web server : enable
Web server port : 80
Web secure server : enable
Web secure server port : 443
POST result :
UART Loopback Test......................PASS
Timer Test..............................PASS
DRAM Test ..............................PASS
I2C Initialization......................PASS
Runtime Image Check ....................PASS
PCI Device Check .......................PASS
Switch Driver Initialization............PASS
Switch Internal Loopback Test...........PASS
------------------- DONE --------------------
Console#
b_mgmt.book Page 53 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
Need help?
General
