M
ANAGING
F
IRMWARE
2-31
CLI – If you copy the running configuration to a file, you can set
this file as the startup file at a later time, and then restart the
switch.
Displaying Bridge Extension Capabilities
The Bridge MIB includes extensions for managed devices that
support Multicast Filtering, Traffic Classes, and Virtual LANs. You
can access these extensions to display default settings for the key
variables, or to configure the global setting for GARP VLAN
Registration Protocol (GVRP).
Command Attributes
• Extended Multicast Filtering Services – This switch does not
support the filtering of individual multicast addresses based on
GMRP (GARP Multicast Registration Protocol).
• Traffic Classes – This switch provides mapping of user
priorities to multiple traffic classes. (Refer to “Class of Service
Configuration” on page 2-87.)
• Static Entry Individual Port – This switch allows static
filtering for unicast and multicast addresses. (Refer to “Setting
Static Addresses” on page 2-47.)
• VLAN Learning – This switch uses Independent VLAN
Learning (IVL), where each port maintains its own filtering
database.
Console#copy running-config file 3-21
destination file name : 051902.cfg
/
Console#
Console#config
Console(config)#boot system config: 051902.cfg 3-26
Console(config)#exit
Console#reload 3-18
b_mgmt.book Page 31 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
