SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart - Show Queue Cos-Map; Map Ip Precedence (Global Configuration)

C OMMAND L INE I NTERFACE
3-166
show queue cos-map
Use this command to show the class of service priority map.
Syntax
show queue cos-map [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Example
map ip precedence (Global Configuration)
Use this command to enable IP precedence mapping (i.e., IP Type
of Service). Use the no form to disable IP precedence mapping.
Syntax
map ip precedence
no map ip precedence
Console#show queue cos-map ethernet 1/11
Information of Eth 1/11
Queue ID Traffic class
-------- -------------
0 1 2
1 0 3
2 4 5
3 6 7
Console#
b_mgmt.book Page 166 Tuesday, July 8, 2003 5:24 PM