VLAN C
OMMANDS
3-133
• VLAN 1 cannot be suspended, but any other VLAN can be
suspended.
• You can configure up to 255 VLANs on the switch.
Example
The following example adds a VLAN, using vlan-id 105 and name
RD5. The VLAN is activated by default.
Related Commands
show vlan (3-140)
interface vlan
Use this command to enter interface configuration mode for
VLANs, and configure a physical interface.
Syntax
interface vlan vlan-id
vlan-id - ID of the configured VLAN. (Range: 1-4094, no
leading zeroes)
Default Setting
None
Command Mode
Global Configuration
Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Console(config-vlan)#
b_mgmt.book Page 133 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
