SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart User Manual

C ONFIGURING THE S WITCH
2-36
Port Configuration
Displaying Connection Status
You can use the Port Information or Trunk Information pages to
display the current connection status, including link state, speed/
duplex mode, flow control, and auto-negotiation.
Command Attributes
• Name – Interface label.
• Type – Indicates the of port type (1000Base-TX or
1000Base-SFP).
• Admin Status – Shows if the interface is enabled or disabled.
• Oper Status – Indicates if the link is Up or Down.
• Speed/Duplex Status – Shows the current speed and duplex
mode.
• Flow Control Status – Indicates the type of flow control
currently in use.
• Autonegotiation – Shows if auto-negotiation is enabled or
disabled.
• Trunk Member – Shows if port is a trunk member. (Port
Information only.)
• Creation – Shows if a trunk is manually configured or
dynamically set via LACP. (Trunk Information only.)
b_mgmt.book Page 36 Tuesday, July 8, 2003 5:24 PM

SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Specifications

General

Brand	SMC Networks
Model	SMC EZ Switch 10/100/1000 SMCGS8P-Smart
Category	Switch
Language	English