C
OMMAND
L
INE
I
NTERFACE
3-54
Command Usage
The session used to execute this command is indicated by a “*”
symbol next to the Line (i.e., session) index number.
Example
show version
Use this command to display hardware and software version
information for the system.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
See “Displaying System Information” on page 2-8 for detailed
information on the items displayed by this command.
Console#show users
Username accounts:
Username Privilege
-------- ---------
guest 0
admin 15
Online users:
Line Username Idle time (h:m:s) Remote IP addr.
----------- -------- ----------------- ---------------
* 0 console admin 0:00:00
1 vty 0 admin 0:04:37 10.1.0.19
Console#
b_mgmt.book Page 54 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
