SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart User Manual

C OMMAND L INE I NTERFACE
3-36
• The following Web browsers and operating systems currently
support HTTPS:
* To specify a secure-site certificate, see“Replacing the Default Secure-site Certificate”
on page -23. Also refer to the copy command on page 3-21.
Example
Related Commands
ip http secure-port (3-36)
ip http secure-port
Use this command to specify the UDP port number used for
HTTPS/SSL connection to the switch’s Web interface. Use the no
form to restore the default port.
Syntax
ip http secure-port port_number
no ip http secure-port
port_number – The UDP port used for HTTPS/SSL.
(Range: 1-65535)
Default Setting
443
Command Mode
Global Configuration
Web Browser Operating System
Internet Explorer 5.0 or
later
Windows 98,Windows NT (with service
pack 6a), Windows 2000, Windows XP
Netscape Navigator 4.76 or
later
Windows 98,Windows NT (with service
pack 6a), Windows 2000, Windows XP,
Solaris 2.6
Console(config)#ip http secure-server
Console(config)#
b_mgmt.book Page 36 Tuesday, July 8, 2003 5:24 PM

SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Specifications

General

Brand	SMC Networks
Model	SMC EZ Switch 10/100/1000 SMCGS8P-Smart
Category	Switch
Language	English