SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart - Show Mac-Address-Table Aging-Time

C OMMAND L INE I NTERFACE
3-112
Command Mode
Global Configuration
Command Usage
The aging time is used to age out dynamically learned
forwarding information.
Example
show mac-address-table aging-time
Use this command to show the aging time for entries in the
address table.
Default Setting
None
Command Mode
Privileged Exec
Example
Console(config)#mac-address-table aging-time 100
Console(config)#
Console#show mac-address-table aging-time
Aging time: 300 sec.
Console#
b_mgmt.book Page 112 Tuesday, July 8, 2003 5:24 PM