IGMP S
NOOPING
C
OMMANDS
3-149
ip igmp snooping
Use this command to enable IGMP snooping on this switch. Use
the no form to disable it.
Syntax
ip igmp snooping
no ip igmp snooping
Default Setting
Enabled
Command Mode
Global Configuration
Example
The following example enables IGMP snooping.
Mulitcast Router Commands
ip igmp snooping
vlan mrouter
Adds a multicast router port GC 3-158
show ip igmp
snooping mrouter
Shows multicast router ports PE 3-159
Console(config)#ip igmp snooping
Console(config)#
Command Function Mode Page
b_mgmt.book Page 149 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
