C
OMMAND
L
INE
I
NTERFACE
3-30
username
Use this command to require user name authentication at login.
Use the no form to remove a user name.
Syntax
username name {access-level level | nopassword |
password {0 | 7} password}
no username name
• name - The name of the user.
Up to 8 characters, case sensitive.
Maximum number of users: 16
• access-level level - Specifies the user level.
• The device has two predefined privilege levels:
0:NormalExec,15:Privileged Exec.
• nopassword - No password is required for this user to log
in.
•{0 | 7} - 0 means plain password, 7 means encrypted
password.
• password password - The authentication password for the
user. (Maximum length: 8 characters plain text, 32 encrypted,
case sensitive)
Default Setting
• The default access level is Normal Exec.
• The factory defaults for the user names and passwords are:
Command Mode
Global Configuration
username access-level password
guest
admin
0
15
guest
admin
b_mgmt.book Page 30 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
Need help?
General
