SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart User Manual

C OMMAND L INE I NTERFACE
3-106
show interfaces switchport
Use this command to display the administrative and operational
status of the specified interfaces..
Syntax
show interfaces switchport [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
Default Setting
Shows all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is
displayed. The items displayed by this command include:
• Broadcast threshold – Shows if broadcast storm suppression
is enabled or disabled; if enabled it also shows the threshold
level (page 3-100).
• Lacp status – Shows if Link Aggregation Control Protocol has
been enabled or disabled (page 3-179).
• VLAN membership mode – Indicates membership mode as
Trunk or Hybrid (page 3-134).
• Ingress rule – Shows if ingress filtering is enabled or disabled
(page 3-136).
• Acceptable frame type – Shows if acceptable VLAN frames
include all types or tagged frames only (page 3-135).
• Native VLAN – Indicates the default Port VLAN ID (page
3-137).
b_mgmt.book Page 106 Tuesday, July 8, 2003 5:24 PM

SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Specifications

General

Brand	SMC Networks
Model	SMC EZ Switch 10/100/1000 SMCGS8P-Smart
Category	Switch
Language	English