SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart User Manual

C OMMAND L INE I NTERFACE
3-92
interface
Use this command to configure an interface type and enter
interface configuration mode. Use the no form to remove a trunk.
Syntax
interface interface
no interface port-channel channel-id
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
• vlan vlan-id (Range: 1-4094)
capabilities Advertises the capabilities of a given
interface for use in autonegotiation
IC 3-96
flowcontrol Enables flow control on a given interface IC 3-97
shutdown Disables an interface IC 3-99
switchport
broadcast
Configures broadcast storm control IC 3-100
port security Enables port security on an interface. IC 3-101
clear counters Clears statistics on an interface PE 3-102
show
interfaces
status
Displays status for the specified interface NE,
PE
3-103
show
interfaces
counters
Displays statistics for the specified interface NE,
PE
3-104
show
interfaces
switchport
Displays the administrative and operational
status of an interface
NE,
PE
3-106
Command Function Mode Page
b_mgmt.book Page 92 Tuesday, July 8, 2003 5:24 PM

SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Specifications

General

Brand	SMC Networks
Model	SMC EZ Switch 10/100/1000 SMCGS8P-Smart
Category	Switch
Language	English