SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart User Manual

P RIORITY C OMMANDS
3-169
map ip dscp (Global Configuration)
Use this command to enable IP DSCP mapping (i.e., Differentiated
Services Code Point mapping). Use the no form to disable IP
DSCP mapping.
Syntax
map ip dscp
no map ip dscp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The precedence for priority mapping is IP Precedence or IP
DSCP, and default switchport priority.
• IP Precedence and IP DSCP cannot both be enabled. Enabling
one of these priority types will automatically disable the other
type.
Example
The following example shows how to enable IP DSCP mapping
globally:
Console(config)#map ip dscp
Console(config)#
b_mgmt.book Page 169 Tuesday, July 8, 2003 5:24 PM

SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart Specifications

General

Brand	SMC Networks
Model	SMC EZ Switch 10/100/1000 SMCGS8P-Smart
Category	Switch
Language	English