C
ONFIGURING
THE
S
WITCH
2-42
Web – Click Port, Port Broadcast Control. Set the threshold for all
ports, and then click Apply.
CLI – Specify the required interface, and then enter the threshold.
The following sets broadcast suppression at 128 packets per
second on port 1.
Configuring Port Mirroring
You can mirror traffic from any source port to a target port for
real-time analysis. You can then attach a logic analyzer or RMON
probe to the target port and study the traffic crossing the source
port in a completely unobtrusive manner.
Console(config)#interface ethernet 1/1 3-92
Console(config-if)#switchport broadcast packet-rate 128 3-100
Console(config-if)#
b_mgmt.book Page 42 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
