GVRP
AND
B
RIDGE
E
XTENSION
C
OMMANDS
3-143
show gvrp configuration
Use this command to show if GVRP is enabled.
Syntax
show gvrp configuration [interface]
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
Default Setting
Shows both global and interface-specific configuration.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show gvrp configuration ethernet 1/7
Eth 1/ 7:
Gvrp configuration: Disabled
Console#
b_mgmt.book Page 143 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
