SMC Networks SMC EZ Switch 10/100/1000 SMCGS8P-Smart - Page 72

C ONFIGURING THE S WITCH
2-40
Web – Click Port, Port Configuration or Trunk Configuration.
Modify the required interface settings, and click Apply.
CLI – Select the interface, and then enter the required settings.
Console(config)#interface ethernet 1/13 3-92
Console(config-if)#description RD SW#13 3-93
Console(config-if)#shutdown 3-99
.
Console(config-if)#no shutdown
Console(config-if)#no negotiation 3-95
Console(config-if)#speed-duplex 100half 3-94
Console(config-if)#flowcontrol 3-97
.
Console(config-if)#negotiation
Console(config-if)#capabilities 100half 3-96
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol
b_mgmt.book Page 40 Tuesday, July 8, 2003 5:24 PM