S
PANNING
T
REE
P
ROTOCOL
C
ONFIGURATION
2-55
• Root Hold Time* – The interval (in seconds) during which
no more than two bridge configuration protocol data units
shall be transmitted by this node.
• Configuration Changes — Specifies the number of times the
Spanning Tree has been reconfigured.
• Last Topology Change — Identifies the time since the
Spanning Tree was last reconfigured.
* CLI only.
Web – Click Spanning Tree, STP Information to display current
Spanning Tree information.
b_mgmt.book Page 55 Tuesday, July 8, 2003 5:24 PM
To Next Page
Loading...
