2
SAFETY INSTRUCTIONS
The following basic safety tips are given to ensure safe installation, operation, and maintenance of Stratasys
equipment and are not to be considered as comprehensive on matters of safety. The F900 is designed to be a
safe and reliable rapid prototyping printer. Access to areas of the printer are potentially dangerous.
LOCKOUT TAGOUT (LOTO)
The site must be equipped with appropriate lockout tagout kit for equipment.
HAZARD TYPES
Stratasys recommends that all services be performed by qualified personnel. All personnel working on or around
this system should be knowledgeable of what the following hazard classifications mean throughout this guide.
• Warnings
and Cautions precede the paragraph to which they pertain.
• Notes
follow the relative paragraph.
Warning: Indicates a potentially hazardous situation which, if not avoided, may
result in injury or death.
Caution: Indicates a situation which, if not avoided, could result in damage to
equipment.
Note: Indicates additional information relative to the current topic.
Lockout Bar
Key
Lockout Bar
To Next Page
Loading...
