117
EMPTY THE PURGE BUCKET
The purge bucket is located inside the oven. It catches the material that has been purged or wiped from the
liquefiers and liquefier tips. The purge bucket should be emptied daily. (Figure 6-3)
1. Open the Oven door. Use caution because the oven is hot.
2
. Make sure the build platen is at the bottom of the envelope area.
3
. Lift the purge bucket straight up from the purge bucket bracket and remove from the oven bay.
4
. Empty the waste material from the purge bucket. There is a waste door at the bottom of the
b
ucket.
5. Install the purge bucket on the purge bucket bracket.
Fi
gure 6-3: Pu
rge Bucket
Warning: Always wear safety gloves and long sleeves when working inside the
oven. Components are hot!
Waste Door
Purge
Bucket
Purge Bucket
Bracket
To Next Page
Loading...
