115
MAINTENANCE SCHEDULE
Maintenance tasks must be performed on a regular basis in order to maintain optimal system operation. Table 6-
1 outlines the general maintenance schedule. Detailed instructions for each task make up the rest of this
chapter. Please note that the testing of interlock/protective circuits is not applicable to the F900.
Table 6-1: Maintenance Schedule
Warning: always wear proper heat protective clothing when working inside the
oven.
Daily Weekly Quarterly As Needed Maintenance Task
X
“Clean the Platen” on page 116
X
“Empty the Purge Bucket” on page 117
X
“Vacuum the Build Envelope” on page 118
X
“Clean/Inspect Tip Wipe Assembly” on page 118
X
“Clean the Tip Sensor Plunger” on page 120
X
“Cleaning The Liquefier Tips” on page 121
X
“Cleaning the Cabinet” on page 121
X
“Cleaning Plastic Components” on page 121
X
“Cleaning the Oven Door, Camera/Lamp, and
Touchscreen Display” on page 121
To Next Page
Loading...
