OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
（5）Service and lubrication symbol.
Proper procedure of maintenance and
inspection
Learn about how to properly service machine.
Perform proper maintenance and inspection
procedure in accordance with this manual. Inspect
machine before starting machine.
Check monitor.
Check individual liquate level.
Check hose and piping for leakage, twist, wear
out or damage.
Check surrounding the machine for any signs
of noise, heat etc.
Check parts for looseness and lost.
Caution
If any problems are detected, repair
prior to operation, or contact our
authorized distributor.
Use recommended fuel, hydraulic oil and
lubricant.
Use only genuine SUNWARD components.
The warranty is not applicable for any
damages arising from failure to use
SUNWARD recommended fuel, lubricant,
hydraulic oil and genuine SUNWARD
components.
Do not adjust speed limiting governor of
engine or safety valve of hydraulic system.
Do not allow water or vapor to reach electrical
equipment.
Do not disassemble components such as engine
pump controller, sensor etc.
To Next Page
Loading...
