SUNWARD SWE50E - Page 72

OPERATION & MAINTENANCE MANUAL SWE50E/SWE60E/SWE70E/SWE80E9/SWE100
64
1 Cooling water temperature meter
2 GPS
3 Cooling Water overheat indication
4 Engine oil pressure overheat
indication
5 Preheating indication
6 Flat ground /excavator
7 Menu
8 Buzzer
9 Automatic idle speed enabled button
10 Help/mute
11 Current rev
12 Air filter clogged indication
13 Charging fault indication
14 Low fuel oil level indication
15 Work hour meter
16 Fuel oil level meter
3.3.8.2 Meter functions
1.1 Simulative/numerical oil level
1.2 Simulative/numerical oil quantity
1.3 Numerical rev
1.4 Numerical voltage
1.5 Working hours
1.6 Preheat indication
1.7 Fault record
1.8 Engine fault code warning
indication
1.9 Oil low pressure alarm
1.10 Oil low level alarm
1.11 Water overheat alarm
1.12 Air filter jam-up alarm
1.3 Charging alarm
1.4 Digging and flat module control
1.15 breaking flow control
1.16 Idle speed control