Svantek SV 977D - Page 164

164
SV 977D User Manual
Running SPL
view
Mode of the running SLP result view in Sound
measurement modes. This mode is used for the noise
level estimation before the measurement start.
Chapter
5.1.1
Single Profile
view
Mode of the one result view. This mode is always
available and cannot be disabled in most functions:
Level Meter, 1/1 Octave, 1/3 Octave and FFT.
Chapter
5.1.2
1 Prof. & 3 Prof.
view
Mode of presentation of one result in the upper part of
the screen and three results in the lower part of the
screen.
Chapter
5.1.3
1 Prof. & Logger
view
Mode of presentation of one result in the upper part of
the screen and time history (logger) results in the lower
part of the screen.
Chapter
5.1.3
3 Prof. & Logger
view
Mode of presentation of three results in the upper part of
the screen and time history (logger) results in the lower
part of the screen.
Chapter
5.1.3, 5.1
Logger view
Mode of presentation of time-history (logger) results.
Chapter
5.1.4
Statistics view
Mode of presentation of statistics of sound results.
Chapter
5.1.6
File Info view
Presentation of information regarding file: name, size,
number of records, etc.
Chapter
5.1.9
Meter Table view
List of predefined results with assigned weighting filters
and detector type.
Chapter
5.1.7