Svantek SV 977D User Manual

192
SV 977D User Manual - Appendixes
Table A.3. Measurement parameters
Group name
#1
code
#7
code
#S
code
Code description
Delay in the start of
measurement
Y
AE
nn nn delay given in seconds (0  60)
Start Synchronization
u
0 Off
1 Sync. to full minute
15 Sync. to the full 15 minutes
30 Sync. to the full 30 minutes
60 Sync. to a full hour
Integration period
D
0 - infinity (measurement finished by
pressing the <STOP> push-button or
remotely by sending S0 control code)
nns nn number in seconds
nnm nn number in minutes
nnh nn number in hours
Repetition of the
measurement cycles
(RepCycle)
K
0 - infinity (measurement finished by
pressing the <STOP> push-button or
remotely - by sending S0 control code)
.....................
nnnn - nnnn number of repetitions (1  1000)
Leq / RMS detector type
L
0 - Linear
1 - Exponential
Detector type for statistic
calculations
SE
0 - Linear
1 - Exponential
Day Time Limits
DL
0 - 6h-18h
1 - 7h-19h
Rolling Time
LR
#7,LR;
This function returns Rolling Time values in the
format:
#7,LR,x1[m],x2[m];
where:
x1 – rolling time 1
st
value (1..59 if seconds,
1m..60m if minutes),
x2 – rolling time 2
nd
value (1..59 if seconds,
1m..60m if minutes)
#7,LR,n,xn;
This function sets Rolling Leq time values where:
n – result index (1 or 2),
xn – rolling time n
th
value (1..60 if seconds,
1m..60m if minutes).
and it returns the following sequence of
characters: #7,LR;
Exposure Time
e
n - n = time in minutes (1  480)
Reference Level ACC
Xa
x - x = reference level (1  100) in µm/s
2
Reference Level VEL
Xv
x - x = reference level (1  100) in nm/s
Reference Level DIL
Xd
x - x = reference level (1  100) in pm

Svantek SV 977D Specifications

General

Brand	Svantek
Model	SV 977D
Category	Measuring Instruments
Language	English