SV 977D User Manual - Appendixes
subtype of the instrument:
1 – SVAN 977
3, 13 – BSWA 801, АЛГОРИТМ 05
4, 14 – СПРУТ-9
5 – SVAN 977W
11 – SVAN977A
21 – SV 977D
device type identifier:
977 – SVAN 977, SVAN 977A, SV 977D, SVAN 977W,
АЛГОРИТМ 05, СПРУТ-9
801 – BSWA 801
serial number of the instrument
firmware version number; for example, value 203 means version 2.03
additional number identifying internal firmware conversion; for
example, the complete software version number is 2.03.1
additional internal software upgrade number for Beta version;
number is relevant only if the internal software upgrade is zero; for
example, Beta version is 2.03.06
version number of the result files system; for example, 321 means
version 2.03
Table B.4. Information about calibration
47h = block identifier,
0nnh = block length in words
calibration "Pre" (performed before measurement) type:
0 – no calibration
1 – calibration By Measurement
2 – calibration By Sensitivity
3 – factory calibration
date of the calibration “Pre" (parameter important only for the
performed calibration)
hour of the calibration “Pre" (parameter important only for the
performed calibration)
calibration “Pre" factor in 0.01 dB format (parameter important only
for the performed calibration)
calibration "Post" (performed after measurement) type:
1 – calibration By Measurement
2 – calibration By Sensitivity
0xFFFF – calibration not performed
date of the calibration “Post" (parameter important only for the
performed calibration)
hour of the calibration “Postre" (parameter important only for the
performed calibration)
calibration “Post" factor in 0.01 dB format (parameter important only
for the performed calibration)
To Next Page
Loading...
Need help?
General
