Basic Features
54 Making External Calls
3.2.2 Using the Keypad
To make an outgoing call using the keypad, perform the following steps:
1. Lift the handset of the IP Phone.
• Press 9 (or 8 if both PSTN and VoIP voice services are configured) to spec-
ify an outbound call.
• Dial the required number using the keypad and press Dial/Enter ( ).
2. The system connects the phone to the supplied external number.
N
OTE: If VoIP calls result in an error, logon to Administrator and go to
Base Unit´ View Event Log and look for information on any failures
that occurred.
To Next Page
Loading...