Station Features 144 FlexSet 120S/280S User Guide
Programming: Feature Keys
Key Contents Key Description Procedure/Example
DSS
(Direct Station
Selection)
Permits you to make or transfer a call to an extension
or trunk by using a defined key, and provides a busy
lamp indication for stations or trunks programmed
under a DSS key.
To program a DSS key for extension 4577:
Press
[ProgKy], press the key you wish to program and then
the extension number 4577. To conclude, press the key
again.
Single feature
Permits you to activate or cancel a single Coral
feature.
To program a key to turn the music feature on and off:
Press [ProgKy], press the key you wish to program and then
the feature code #135. To conclude, press the key again.
Series of
features
Permits you to program a series of features under a
single key; useful for one-button speed dialing, voice
response and voice mail system access, and other
complex dialing procedures. The SPKR code #120
must be programmed between each successive
feature sequence.
To program a key to simultaneously turn off the music and
transfer all calls to a library number programmed for voice
mail:
Press
[ProgKy], press the key you wish to program and then
the feature code #135. Dial twice, in succession, SPKR
code #120. Enter feature code #141 7000 (an example of a
library number). To conclude, press the key again.
NOTE! In order for this to work properly, one of the two
features must be previously activated.
Feature key
without
confirmation
tone or display
Permits you to activate or cancel a feature or series of
features without hearing a confirmation tone or seeing
a display. The SPKR code #120 must be programmed
twice after each successive feature sequence.
Follow the directions above and dial twice, in succession,
SPKR code #120 after library code 7000.
Series of
features with
LED indication
Permits you to activate or cancel a series of features
with the LED being controlled by the key pressing
order. When the key is pressed the first time, the LED
will light and the features will be activated. When the
key is pressed again, the LED will be extinguished,
regardless of the current state of the features.
NOTE! The LED On/Off feature code #1301 must be
programmed before the first feature code is entered in
order to function properly.
To program a key to simultaneously turn on both the music
and idle display features:
Press
[ProgKy], press the key you wish to program and then
the LED On/Off feature code #1301 and feature code #135.
Dial twice, in succession, SPKR code #120. Enter feature
code #137. To conclude, press the key again.
To Next Page
Loading...
