Station Features 143 FlexSet 120S/280S User Guide
Programming: Feature Keys
To Delete Programmed Key Contents:
1. Press [ProgKy].
2. Press the programmed key.
3. View contents on system lines.
4. Press the
button.
5. Press the programmed key again to delete.
Programming Boss Group Line Keys
Each FlexSet in a Boss Group can be programmed with line keys. The use of programmed line keys
assists in defining the various ways in which a Boss Group can answer incoming calls.
To Program Line Keys:
1. Press [ProgKy].
2. Press the
LINE NN DSS key you wish to program.
3. Dial LINE feature code (default dial number: #126).
4. Dial the Line number (
00 = first line, 01 = second line, etc.).
5. Dial the Boss Group number.
6. Press the selected
LINE NN DSS key again.
7. Press the
SPKR key to release.
NOTE: Do not perform the above steps if your FlexSet has a button preprogrammed with a number of
the trunk reserved for your Boss Group. This button will be used as a line key.
To Next Page
Loading...
