Station Features 160 FlexSet 120S/280S User Guide
Setup: Telephony Features
1. Press [Prefer].
2. Select the required destinations by pressing the programmed DSS keys. You can program a
maximum of six priorities in any order:
• OUTSIDE Line: trunk/trunk group/dial service or routing access
• LOOP (default access code #121)
• LOOP Originating Only (default access code #125)
• Boss Group Line Key
Alternatively, to view the priorities, press the
button to scroll through the list.
3. Dial the Activation Code (default #11) to assign priority.
Alternatively, dial the Cancellation Code (default #10) to cancel priorities.
4. Listen for the confirmation tone.
NOTE: If you intend to select an OUTSIDE line as the first priority, you must program a LOOP or
LINE key to be able to dial internal numbers. When activating a feature, press the LOOP or
LINE key first, then dial the required number.
TIP: This feature is useful if you make mostly trunk (external) calls. Assign a preference to an
outside line(s), and each time you make a call, you will be connected directly to an external
trunk.
[PrvLib] Private Library is used to program your personal Speed Dial Directory. A Private Library can be used
to speed dial long numbers. Also, you can use a Private Library to dial external or network numbers for
features that allow only internal destinations such as Call Forward, Divert and Hunt features.
For full explanation of this feature, see Private Library on page 138.
[Secure] Security Line is used to block another user from employing the Break In feature on your FlexSet
extension. All Call Waiting and Break In feature tones are blocked. When activated, a caller attempting
to break in to your station will receive a reorder tone. Only a station that has Security override privilege
can break into your secured phone.
Press the [Secure] toggle switch to activate, and again to deactivate. A bullet is displayed next to [Secure] to
indicate when the feature is activated.
To Next Page
Loading...
