Station Features 161 FlexSet 120S/280S User Guide
Setup: Telephony Features
[DND-WP] Do Not Disturb - Whisper Page is used to enable or block your FlexSet from receiving a message
whispered by another station. Press [DND-WP] from idle to block or enable your FlexSet from receiving
whisper pages, and again to cancel. When this feature is activated, a bullet appears next to [DND-WP].
If you press while on a call, the feature will be active for the duration of the current call only.
[Privac] Privacy. As a Boss Group member, you can put your FlexSet into Privacy mode. This prevents other
members of your Boss Group from accidentally joining your conversations.
(See Boss Groups: Privacy on page 61)
1. To activate Privacy, press [Setup] [Privacy].
The message PRIVACY is displayed.
When this feature is activated, a bullet appears next to [Privac].
2. To cancel Privacy, press [Privacy] again.
The message NO PRIVACY is displayed.
[ExHold] Exclusive Hold. As a Boss Group member, you can put your FlexSet into Exclusive Hold mode. This
ensures that a call placed on hold can be retrieved only at your station. If Exclusive Hold is cancelled,
the call put on hold can be retrieved by any other member of your Boss Group.
(See Boss Groups: Exclusive Hold on page 62)
1. To activate Exclusive Hold, press [Setup] [ExHold].
The message EXCLUSIVE HOLD is displayed.
When this feature is activated, a bullet appears next to [ExHold].
2. To cancel Exclusive Hold, press [ExHold] again.
The message NON EXCL. HOLD is displayed.
[MoveSt] Auto Set Relocate (move station) allows you to move your station and all your station’s predefined
features to a new location.
See Auto Set Relocate on page 56.
To Next Page
Loading...
