Station Features 173 FlexSet 120S/280S User Guide
Transfer: Broker/Consultation/3-Way Conference Call
Transfer: Consultation
This feature allows you to consult with a third party while the original caller (or called party) is automatically placed
on hold.
After the consultation is complete, the two original parties are reconnected and the consulted party is released.
1. During the call, press [Xfer] or the
XFER fixed key.
2. Dial the third party dial number.
3. When your call is answered, the original party is placed on hold so that you may converse privately with the
second party.
4. After the consultation is concluded, press [Conslt] or [Xfer] to return to the original call and disconnect from the
consulted party.
NOTE: If you do not succeed in establishing the Consultation call, your Transfer COS definition may be defined as
Transfer Broker or Transfer 3-Way.
To Next Page
Loading...
