Tadiran Telecom FlexSet 280S - Page 184

Station Features 176 FlexSet 120S/280S User Guide
Turret
Double Audio mode:
The turret console is comprised of two fully configured FlexSets that can be operated independently one of another
(see page 179). One of the phones is defined as a primary and the other as a secondary (partner).
Both keysets’ expansion modules are operated by the primary keyset. Pressing a DSS button on any of the six
expansion modules activates the primary phone.
Primary and partner expansion modules may operate a secondary keyset provided the secondary keyset is in dialing
mode and the primary is not.
To make a call from the Primary FlexSet:
• From the primary FlexSet, dial the number of the person to call
or
• Press a DSS button on the primary FlexSet or on any of the six expansion modules
To make a call from the Partner FlexSet
• From the partner FlexSet, dial the number of the person to call
or
• Press a DSS button on the partner FlexSet
or
• 1. Ensure that the primary FlexSet is not in dialing mode
1
.
2. Press SPKR button or lift the handset of the partner keyset.
3. Press the relevant DSS button on the partner keyset or on one of the six expansion modules.
1
Dialing mode means either of the following:
• The telephone is in off-hook state
• SPKR or XFER button is pressed
• Dialing process is in progress
If both keysets are in dialing, pressing a DSS button on any of the six expansion modules will initiate a call from the primary keyset.