Attendant Features 198 FlexSet 120S/280S User Guide
System Features
[ATT-To] Alternate Attendant Destination. This feature enables you to program an alternate attendant
destination or extension if the console is left unattended. After a time-out period, incoming calls to an
unattended console will be re-routed to the selected destination and the attendant console will go into
unattended mode (See Do Not Disturb (DND) on page 87). Any action that is performed at the original
console will force it back to attended mode and the alternate destination back to normal operation.
Possible destinations are station, hunt group, boss group, UNA/ central bell, pre-recorded DVMS
message, public/private speed call, and group call.
Program an alternate destination in the following way:
1. Press [ATT-To].
2. Dial the destination number where calls are to be forwarded, OR
Choose [Dest] to change the destination, OR
Choose [Cancel] to cancel the alternate destination.
3. Listen for the confirmation tone.
To Next Page
Loading...
