Attendant Features 202 FlexSet 120S/280S User Guide
System Features
[Time] Time is used to change the system time and date.
Setting the time:
1. Press [Time].
2. Dial the time, 4 digits (12 hour clock) use leading zeros, e.g. 0805 for 5 minutes after 8.
3. Choose [AM] or [PM].
4. Choose [Set].
5. Listen for the confirmation tone.
Setting the date:
1. Press [Time].
2. Choose [Date].
3. Dial the date, 6 digit format: mm:dd:yy or dd:mm:yy (depending on your system setup). Use
leading zeros.
For Example: May 26, 2004 should be entered as 052604 in North America, 260504 in Europe.
4. Choose [Set].
5. Listen for the confirmation tone.
To Next Page
Loading...
