During Idle 43 FlexSet 120S/280S User Guide
[Setup] Setup is used to program your station for specific feature activation. (page 156)
[Trace] Malicious Call Trace is used to record the next x (a system defined variable) calls to your FlexSet. A
list of these calls can be sent to a printer or terminal. (page 107)
[aTrace] Attendant Call Trace is relevant for Attendant Console only. Use Attendant Malicious Call Trace to
set or print a call trace for any station. (page 188)
[RoomSt] Room Status is used to toggle the room status definition of your station on or off. (page 154)
[aRmSts] Attendant Room Status is relevant for Attendant Console only. Use the Attendant Room Status feature
to toggle the room status definition of any station on or off. (page 189)
[BG:Fwd] Boss Group: Call Forward enables you to define the conditions under which incoming calls to your
Boss Group are forwarded to another destination. (page 64)
[aFwd] Attendant Call Forward is relevant for Attendant Console only. Used by the attendant to program
stations, boss groups and ACD/UCD groups so that incoming calls ring at another destination.
(page 186)
[Charge] Call Charge is relevant for Attendant Console only. This attendant feature shows the charges
accumulated per station. The attendant may reset and print the Charge Table content. (page 192)
[St.Set] Station Setup is relevant for Attendant Console only. Station Setup allows the attendant to define
stations for specific feature activation. (page 194)
[Tk.Set] Trunk Setup is relevant for Attendant Console only. Trunk Setup allows the attendant to define trunks
for specific feature activation. (page 203)
[System] System Setup is relevant for Attendant Console only. System features (time, public library, etc) can be
edited from this menu. (page 196)
To Next Page
Loading...
