5 First steps
100
◦ In the diagram (selecting individual measuring points), the
measuring point selections are regularly incorporated in the
measuring cycle - without gaps.
• Generate and acknowledge at least one SMS or email alarm
• Wait for an automatic report or create it for test purposes under
Options | System test
• No open alarms in the overview window
Pos: 96 /TD/Erst e Schritte/testo Saver is/06 ****Probelauf /Systemtest durc hführen Zusatz PRO @ 14\mod_13 80717099925_79.doc x @ 177461 @ @ 1
• Where there is regulated user access: authorised employees
have access to the system in accordance with their
permissions.
Pos: 97 /TD/Erst e Schritte/testo Saver is/06 ****Probelauf /Systemtest Zusatz mobil @ 10\mod_132136172 2658_79.docx @ 103168 @ @ 1
• In the Tours
5
main menu:
◦ Measured values and duration of tours carried out are
displayed correctly.
◦ From the data of the mobile zones, a tour blank can be
generated via [Define tour], which is displayed under
Tours.
• At the Saveris cockpit unit:
◦ All mobile zones and tour descriptions configured in the
software can be selected in the Saveris cockpit unit under
Tour settings.
◦ When the tour is active, limit value violations are shown on
the display and indicated via the red LED. They can be
acknowledged on the Saveris cockpit unit.
◦ Create test printout: All measured values are printed out in a
15-min cycle. Additional lines and signature line appear on
the printout as defined in the software in the System main
menu.
Pos: 98 /TD/Erst e Schritte/testo Saver is/06 ****Probelauf /Systemtest Hinwei s Base-Backup @ 10\mod_132 1606974422_79.doc x @ 103203 @ @ 1
After a successful system test, a base backup is
recommended, see Saving data in the Saveris base, page
183.
Pos: 99 /TD/Erst e Schritte/testo Saver is/07 **** Montage der Hard ware/00 Hardware monti eren @ 0\mod_118915757 9984_79.docx @ 4124 @ 3 @ 1
5
Only during mobile monitoring
To Next Page
Loading...
Need help?
General
