TESTO Saveris User Manual

7 Maintaining the product
180
3. Click on [Next >].
- The software automatically detects whether the probe was
already logged in and opens the Commission New Probe
dialogue box.
4. In the Connect [To] column, select if the probe measuring
values should be updated in the existing data column or
5. [Off] should be selected if the probe measuring values should
be displayed in a separate data column.
6. Click on [Next >].
- The Configure New Probe dialogue box is displayed.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery