TESTO Saveris User Manual

5 First steps
54
3. Enter the project name in the Name field.
4. Determine which configuration data are to be used:
• Click on [Cancel] to reconfigure the project without using
predefined configuration data.
- Refer to installation instructions for information on
reconfiguring a project.
• Mark an existing project and click on [OK] to adopt the
configuration data of the marked project for the new project.
- The system settings of the Saveris base that are based on
the marked project are shown.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery