TESTO Saveris - Page 57

5 First steps
57
The entry is available if Saveris Professional Client is
installed
• Saveris Viewer.
The entry is available if Saveris Professional Viewer is
installed
- The Testo Saveris software program window is opened with
the Select project dialogue.
If the software will not start, check whether the testo
tdassvcs service is started in the service management
of the operating system and restart it, if needed.
2. Select the
• Only active projects option if the data from a running
project should be opened
• All projects option if the data from a completed project
should be opened.
3. Select the project that is to be opened in the tree structure.
4. Confirm with [OK].
- The Testo Saveris software program window is shown with
the selected data record in the foreground.