TOHATSU BFT75A - Page 291

9-6
dummyheaddummyhead
STARTING SYSTEM
Remove the bolts [1] and starter motor [2].
Remove the O-ring [1] from the starter motor [2].
INSTALLATION
Install a new O-ring [1] to the starter motor [2].
Install the bolts [1] and tighten them to the specified
torque.
[1]
[2]
[1]
[2]
[2]
[1]
TORQUE: 44 N·m (4.5 kgf·m, 32 lbf·ft)
[1]