19-30
dummyheaddummyhead
CONTROLS
Remove the throttle cable pin [1] from the throttle cable
pivot [2].
Loosen the nut [3] of the throttle cable pivot, and
remove the throttle cable pivot, nut, and rod grommet
[4] from the throttle rod [5].
Remove the two screws [1] and remove the lock plate [2].
Remove the two screws [3], and remove the spring guide [4], spring [5], shift arm pin [6], and the roller [7].
Remove the shift gear [8] and the bushing [9] from the shift frame [10].
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
To Next Page
