20
COMPONENTS
R button/L button.....................Selects the right/left eye. By tapping the button, the main
body unit moves to the selected direction. The selected but-
ton is framed in purple. The layout where the R/L button is
displayed reverses according to the position of the control
panel.
T/P measurement mode selection button
......Selects each measurement TONO, PACHY.
Up/down button for chinrest......Moves the chinrest up/down.
Air check button..................................Perform air check. Check if the measurement system inside
the instrument is working properly.
End button..........................................The chinrest and measuring head move to the last position.
Turn off the power when the movement to the last position
has completed.
Measuring head forward/backward button
....Moves the measuring head closer to/away from the patient's
eye. The direction of movement is reversed according to the
position of the control panel.
Start button..........................................Starts measurement.
Auto/Manual button.................................Switches between Auto mode and Manual mode.
If “AUTO” is displayed on the control panel it is in Auto mode,
if “MANUAL” is displayed it is in Manual mode. The name of
the selected mode (“Auto” or “Manual”) is displayed on the
control panel.
Mode button..........................................Selects and sets each measurement of REF, KRT, TONO,
and PACHY.
IOL button...........................................If alignment does not work with a patient who has an IOL,
tapping this button may allow the measurement. When this
button is selected, the IOL icon appears in the upper part of
the control panel, and the button frame changes to purple.
Sets the brightness of the LED for IOL. Refer to “
OPTIONAL
OPERATIONS” on page 73.
30/60 button....................................Switches the range of intraocular pressure values to be mea-
sured between 7-30 mmHg and 30-60 mmHg.
To Next Page
Loading...
