31
PREPARATIONS
3 Remove the measuring window caps.
CONNECTING POWER CORD
1 Make sure the POWER switch of the instrument is OFF.
2 Connect the power cord to the Power inlet.
3 Insert the power cord plug into the commercial power (the 3-pin AC grounding receptacle.)
4 Turn the POWER switch ON.
WARNING
Be sure to connect the power plug to an AC 3-pin receptacle equipped
with grounding. Connection with receptacle without grounding may
cause fire and electric shock in case of short-circuiting.
CAUTION
• To avoid electric shocks, do not handle the power plug with wet
fingers.
• The power cord in standard accessories for this instrument can-
not use besides this instrument.
Measuring window cap
To Next Page
Loading...
