30
PREPARATIONS
INSTALLATION
1 Firmly hold the designated position of the instrument with both hands and place it on the adjust-
able instrument table.
2 Remove the tape for transportation.
CAUTION
• When moving the instrument, two people should lift from the bot-
tom of the device. One person lifting the device may cause harm
to his back or injury by falling parts.
• When holding the bottom of the instrument, avoid touching a pro-
jection of screws to prevent injury.
• To prevent damage and injury, do not hold anything but bottom. If
you hold, it may cause to catch the finger or to damage the
instrument by falling.
• To prevent damage and injury, do not install the instrument on an
uneven, unsteady or sloped surface.
• To prevent injury, when setting an instrument on an instrument
table, pay attention not to catch a finger between the instrument
and the table.
• When installing the main body unit on an adjustable instrument
table, etc., make sure that the chinrest does not protrude from
the top plate. When a load is applied to the chinrest, the instru
-
ment may tip over and cause injury.
Holding positions
Holding the instrument
Tape for transportation
To Next Page
Loading...
