33
PREPARATIONS
DATA INPUT
This instrument can be connected to a barcode reader via USB.
1 Connect the barcode reader to the input terminal of the instrument.
CAUTION
• Do not operate a touch panel during barcode data entering by
barcode reader. If you enter data when tapping the button on the
touch panel, the barcode may not be read normally.
• Do not align, measure, or output data during barcode data enter
-
ing by barcode reader. If you enter data during these operations,
the barcode may not be read normally.
• Take care not to enter the wrong patient information. It may be
mistaken for information from another patient.
NOTE
• Please use a barcode reader with the following interface specifications.
Connector shape: USB (type A)
Interface: USB
Power supply: USB bus power
• Please connect USB devices while the POWER switch of this instrument
is OFF. It may not correctly recognize USB devices if this instrument is in
operation.
• For questions about connections, contact your TOPCON dealer.
To Next Page
Loading...
