72
BASIC OPERATIONS
BASIC OPERATIONS
OPERATION AFTER USE
OPERATION AFTER USE
1 Tap the button on control panel.
2 A confirmation message for the end operation is displayed.
3 Tap the button. Return the chinrest and measuring head to their last positions.
4 The message of “End of operation in progress. Please wait until complete.” is displayed.
5 The operation is complete, then the message of “End of operation complete. Please turn
power off on unit.” is displayed.
6 Turn the POWER switch to off.
7 If external device is connected, turn off the device.
8 Unplug the power cord from a 3-pin AC inlet with grounding.
NOTE
When the instrument is not used for a long period of time, unplug the power
cord, and detach the cable connected to the external I/O terminal.
End
OK
To Next Page
Loading...
