Topcon TRK-3 OMNIA - Basic Operations; Operation Flow Chart

39
BASIC OPERATIONS
BASIC OPERATIONS
OPERATION FLOW CHART
BASIC OPERATIONS
OPERATION FLOW CHART
MEASURING PROCEDURE IN REF/KRT TONO/PACHY CONTINUOUS MEASUREMENT
TURNING ON THE INSTRUMENT (page 40)
SELECTING THE MEASUREMENT MODE
(page 43)
CHECKING THE MEASURING NOZZLE
(page 44)
AIR CHECK (page 45)
SETTING THE PATIENT ID (page 47)
PATIENT POSITIONING (page 51)
SETTING THE SAFETY STOPPER
(page 53)
ALIGNMENT AND MEASUREMENT IN
REF/KRT (page 57)
ALIGNMENT AND MEASUREMENT IN
TONO/PACHY (page 62)
PRINT-OUT OF MEASUREMENT VALUES
(page 65)
OPERATION AFTER USE (page 72)
MEASUREMENT IN
REF/KRT TONO/PACHY
CONTINUOUS
MEASUREMENT
Insert the power cord plug
into the commercial power.
PREPARATION BEFORE
MEASUREMENT